tort Posted August 21, 2007 Share Posted August 21, 2007 How do you guys typically set up your J plugs? Do you run flashers in front of them? Link to comment Share on other sites More sharing options...
wolfe99 Posted August 21, 2007 Share Posted August 21, 2007 you mean for fall fishing salmon when they are stacking up? or regular trolling Link to comment Share on other sites More sharing options...
EdB Posted August 22, 2007 Share Posted August 22, 2007 Just run a plain j-plug, no flasher is needed. Use a swivel small enough to go through the hole in the j-plug. This will allow the plug to slide up the line away from a fish when hooked up and the fish can't use the plug as leverage to get off. They are great on cores but full cores can be tough to run in traffic this time of year. They work great on half cores and you can run them around other boats if not in crowded condition like in front of pier heads. I avoid fishing there anyways. I like to run a longer leads with j-plugs off riggers in shallow water less than 50 ft and high slide divers and long leads are good too. Hope this helps. Link to comment Share on other sites More sharing options...
DIRTY DOG Posted August 22, 2007 Share Posted August 22, 2007 this is also how i do it, only i don't use a swivle i just tie to the chane Link to comment Share on other sites More sharing options...
tort Posted August 23, 2007 Author Share Posted August 23, 2007 thanks for the input!!doug Link to comment Share on other sites More sharing options...
Bob's Outdoors Posted August 29, 2007 Share Posted August 29, 2007 I tie a leader to the bead chain about 6" long so that I can use my regular swivel but the plug can still work its way up.or I use a Lyman plug and not have to deal with that stuff at all. Link to comment Share on other sites More sharing options...
Satisfaxion_Gauranteed Posted August 29, 2007 Share Posted August 29, 2007 or I use a Lyman plug and not have to deal with that stuff at all.I'm a big believer in the Lyman plugs. Nearlly all of them glow, they are made out of Cedar, so the action the wood has is extremely eractic, and they catch fish. I was hesitant to try them at first due to the price, but I continue to be extremely pleased with the Lyman plugs. They are pricey, but they will survive multiple fish without experiencing significant finish problems.my 2cents, Link to comment Share on other sites More sharing options...
Sea-Mac Posted August 29, 2007 Share Posted August 29, 2007 I tie a leader to the bead chain about 6" long so that I can use my regular swivel but the plug can still work its way up.Brilliant! TY Bob! I was cutting off my swivels then retying them on my leadcore leader everytime id do the switch from spoon to plug. At the point now I should prolly reapply new leadcore leaders again. Done this about 4 times allready this year. Thanks again. Link to comment Share on other sites More sharing options...
Joe von Grabe Posted September 4, 2007 Share Posted September 4, 2007 This maybe the same as what Bob does but to expand. I tie about a one foot leader from the bead chain to a barrel swivel that's small enough to go through the J-Plug hole. I make up a bunch of these ahead of time and have them handy. If a fish really swallows the hooks or you have a bent hook or frayed leader, just put a new setup on. You can even just put the fish in the cooler with the old hook still in it and worry about it later. This comes in handy during prime time low light conditions especially during harbor patrol.Joe Link to comment Share on other sites More sharing options...
toanton Posted April 8, 2008 Share Posted April 8, 2008 hello everybody,what is you favorite j-plug size ? same as spoon, bigger, smaller ? I bought several #4 & #5 j-plugs and worry that they are huge. Link to comment Share on other sites More sharing options...
Nailer Posted April 8, 2008 Share Posted April 8, 2008 hello everybody,what is you favorite j-plug size ? same as spoon, bigger, smaller ? I bought several #4 & #5 j-plugs and worry that they are huge.#4 is the most common for us , but I've landed many on the #5s. I used to run a #3 behind my Dipsey rig with good results (before flys/flasher where so common). They all work great in the late summer. Link to comment Share on other sites More sharing options...
Priority1 Posted April 8, 2008 Share Posted April 8, 2008 I run a lot of #4 and #5. I like the glows. Link to comment Share on other sites More sharing options...
SkeinMachine Posted April 8, 2008 Share Posted April 8, 2008 For reasons unknown,I can't get J's to fire,Lymans on the other hand...... :rolleyes: Link to comment Share on other sites More sharing options...
Satisfaxion_Gauranteed Posted April 9, 2008 Share Posted April 9, 2008 For reasons unknown,I can't get J's to fire,Lymans on the other hand...... :rolleyes: I'm with you, Lymans are my go to plug of choice. Come July and August, there's always a white Lyman plug in the water for me. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now