Tom Thumb Posted January 29, 2006 Share Posted January 29, 2006 I read on a thread of two people using Cannons Temp & Speed. devices. I have used the Fish hawlk for over8 years and I am fairly pleased with the unit but it has some draw backs. After sending it down over 175 feet my transducer is not tipped back far enough to make a reading. And if any water penatrates the unit it is shot.I would like some information that I can not find on any web site yet on the cannons model. It states to read down up to 300 feet one must use coated wire. It makes sence but what is the diameter of this wire and where can it be purchased.How is the information transmitted from the wire to the reciever?Is the unit completly sealed? Completly water tight?I find that there are older models out there that are not compatable with the receivers of todayWhat is the max depth that you had your units working?Is the number of 200 hour on one battery acurrate?What are the faults you have found with the Cannon model?I am an electronics nut Link to comment Share on other sites More sharing options...
Adjusted3 Posted January 30, 2006 Share Posted January 30, 2006 From the Cannon WebsiteCannon Speed-N-Temp MonitorIt's like having a spy in the murky depths. Now any downrigger can do more than just hold a weight at the end of a cable.The new Speed-N-Temp™ Monitor from Cannon® has its own monitor for use with any downrigger on the market. Simply attach this informative accessory to any manual or electric downrigger and unlock the mysterious secrets of dark and deep trolling waters. The sealed underwater transmitter attaches to the cable of any downrigger just above the weight. The sensors on the Speed-N-Temp Monitor register the absolute depth of the lure and the lure¹s true speed as well as light intensity and water temperature at the lure's trolling location. These readings are then electronically transmitted up through the downrigger cable and digitally displayed on the Speed-N-Temp Monitor. Absolute depth of lure eliminates blow-back estimations and calculations that anglers normally must decipher. While the boat may be traveling at 2.5 mph, the lure may travel at different speeds depending on underwater currents.With the Speed-N-Temp Monitor, true lure speed in tenths of mph can be adjusted by the angler providing optimum strike stimulation. A chartreuse and blue lure looks great in the sunlight but at a depth of 80 feet with filtered light the lure may look invisible to the fish. Speed-N-Temp Monitor measures light intensity and the appropriate lure color can be selected for the conditions at the trolling depth. Water temperature at the lure¹s depth is provided, crucial for tracking temperature sensitive fish. Using a standard cable, the Speed-N-Temp Monitor operates up to a maximum depth of 100 feet. A coated cable increases operation depth up to 300 feet. Speed-N-Temp activates when the speed wheel enters the water and automatically shuts off after 15 minutes of inactivity. A replaceable 9-volt battery powers the transmitter for up to 200 hours of operation. Battery voltage is also digitally displayed on monitor screen. The use of Cannon¹s Speed-N-Temp Monitor will not interfere with downrigger features such as Short Stop, Positive Ion Control and Stacker Releases. The 7.2* square inch screen, with 2,300 pixels per square inch, provides an easy-to-read display of the transmitted information. Overall, the saltwater protected monitor measures 5 inches by 5.3 inches by 2.5 inches and can be easily mounted at any location on the boat. For the look of factory rigging, use the optional installation bracket and mount the monitor in the dash of the console.++++++++++++++++++++++++++I installed one of these units last year. The reception is great with standard cable down to about 75'. I switched to coated cable that comes with the unit and the reception has been great down to 125. I have not had any occasion to fish deeper than that. Regular cable will have reception down to 100, but it cuts in and out after 75'.The best feature for this unit is the light intensity. This one feature has help me more than anything else in the boat. A couple of drawbacks- the coated cable is smaller in dia. then regular downrigger cable. Hence the line counter will be off as much as 10% but you get a true depth on the unit. The sensor is a sealed unit but the battery cover has an o-ring that needs to be watched. DO NOT OVER TIGHTEN. Go snug and then 1/4 turn. To date, I have not had any issue. The cable has to be ran thru a sensor spring that is mounted to the boom of the rigger. There is no quick disconnect and as a result the rigger and the unit, if removed from the boat has to be taken off as a package. When I trailer my boat with the fitted cover, I just remove the rigger and lay it in the bottom of the boat so that I do not have to disconnect the Cannon unit. Plusses---As far as the battery, it uses a 9v transister battery that will give you 200 hours of operation. The unit displays the voltage level in the battery so you know when it is time to change it. You can run up to 6 riggers off this unit and display all 6. All you need is 6 sensors. I did some research on all the units out there, from Moor to the new Raider and I chose Cannon due to the advanced features that it has. Some of the older unit did leak in the sensor, Cannon has since fixed this problem. I am very happy with my unit. Mark Link to comment Share on other sites More sharing options...
Tom Thumb Posted January 31, 2006 Author Share Posted January 31, 2006 Thank You for a good reply,How much coated cable comes with the unit?. I have found a place to get 150# test 7 strand coated ss wire rope but the diamete is larger.I am interested in a piece of coated cable for the unit in a length of 400 feet. Link to comment Share on other sites More sharing options...
Adjusted3 Posted January 31, 2006 Share Posted January 31, 2006 250 feet cable I believe. It might be 200. I will never have an occasion to fish below 140I am not sure if your rigger will hold 400.Mark Link to comment Share on other sites More sharing options...
Tom Thumb Posted January 31, 2006 Author Share Posted January 31, 2006 You also mention that the monitor can be mounted any where in the boat. I need aprox 30 feet of wire from my downrigger to my dash. How much calbe comes with the unit.Some one mentioned that all information is sent to the monitor thru coaxal cable. Is this true? Link to comment Share on other sites More sharing options...
Tom Thumb Posted January 31, 2006 Author Share Posted January 31, 2006 I have Scotty down riggers and I need the 400 feet for we have been catching salmon during mid day with 280' of cable out on Cannons Mag 10s and their cable is larger than the scotty cable. Link to comment Share on other sites More sharing options...
Tom Thumb Posted January 31, 2006 Author Share Posted January 31, 2006 Who has a fair price on one of these units Link to comment Share on other sites More sharing options...
Midway97 Posted February 1, 2006 Share Posted February 1, 2006 I bought my speed/temp late last fall, and I think it has Roughly 300 foot of cable. As for Price.. 9 times outta 10 you cant beat the Fishdog Boys, Mark (adjusted3 on this site) can get you a price pretty quick. Link to comment Share on other sites More sharing options...
Tom Thumb Posted February 1, 2006 Author Share Posted February 1, 2006 Thank You will chec out the fish dog store Link to comment Share on other sites More sharing options...
Adjusted3 Posted February 2, 2006 Share Posted February 2, 2006 Tom, Just to let you know we do electionics by e-mail onlyJust give me a shout if you are interested...Mark Link to comment Share on other sites More sharing options...
SeaGar Posted April 7, 2006 Share Posted April 7, 2006 Mark;I maybe interested in getting a spool of the 400' coated cannon cable for my Digitrol. Can you get it and how much ?Thanks,Ned Link to comment Share on other sites More sharing options...
Adjusted3 Posted April 12, 2006 Share Posted April 12, 2006 Ned, I can get it but pricing is by e-mail only. Please send me an e-mail to Fishdogco.comBy the way. This is a bit of a catch 22 with Cannon. They sell 400 foot spools of cable. CAUTION though, their probe is oly rated to 250'. any deeper and the warrenty is voided. Implosion is posible beyond 250'. We had this dicussion, Right Tom?Mark Link to comment Share on other sites More sharing options...
SeaGar Posted April 12, 2006 Share Posted April 12, 2006 Mark;Thanks for that info -- guess I'll keep the cable on that I have. It use to be 400' then I lost a bunch when I got it all tangled and kinked and just cut it. How much is left, I don't know. I guess I'll have to go out deep and start letting it out to see when it comes to the end.Thanks again,Ned Link to comment Share on other sites More sharing options...
Tom Thumb Posted April 12, 2006 Author Share Posted April 12, 2006 Yes you are absolutly right if the cannon probe is sent in and it leaks it will be determined to leak from mis use. Droping the probe or lowering the probe below 250' . The people who I have talked with that own the cannon probe tell me that its signal fades after 125 FOW with or with out the coated cable.This is just my opinion and due to the fact thatr Cannon just sold their company who knows what would happen. Link to comment Share on other sites More sharing options...
tunanut Posted October 4, 2007 Share Posted October 4, 2007 There is a product now that can be used without a Downrigger. The sensor is tiny and attached between the main line and your leader. Search "Lure Tracking" on eBay Link to comment Share on other sites More sharing options...
Jenny Ann Posted October 20, 2007 Share Posted October 20, 2007 If you are still looking, I have a unit that was on a boat I purchased but do not have the probe. Message me if you are interested and I will give it too you for a very fair price.. Link to comment Share on other sites More sharing options...
Tom Thumb Posted October 20, 2007 Author Share Posted October 20, 2007 Thank you Jenny ann for the reply. This summer I was able to drill a hole in the cap of my present probe and put a shroder valve in it. With 18# of preasure I am water tite to 375' and increasing my gain I can get speed and temp down to 350' Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now