GTRIEM

I just took the windshield off a mastercraft skiboat and these bolts and tape are whats under the aluminum extrusion. I don't know of another way so its going back as stock. I'm down here near elkhart indiana so I'm hoping to find the foam tape local.

here the links for example-

http://www.boatersland.com/tay1166.html

http://www.ebay.com/itm/T-BOLT-BOAT-WINDSHIELD-MARINE-HOLD-DOWNS-SET-OF-36-BOLTS-DIRECT-REPLACEMENT-/281111142141?vxp=mtr

Just shooting from the hip here, but what about a Tyvek(type) material glued up into a removable liner? I doubt any bag would withstand the weight of 10 salmon pulled out of a 2' square opening. Might be a interesting project to try out.

GTR

Hey guys,

Need some advice-

We have been fishing with less than up-to-date electronics for years,

a decent old garmin gps and a hummingbird fish-finder, can't really complain as we usually do pretty well.

Now for my "problem" a friend upgraded his electronics and donated his used stuff to my boat.

Its a LMS-520c and an X510c, also have the LGC3000 external gps ant. and a (i believe)200hz skimmer transducer.

Now as far as i can tell both units need a power cord, i have 1, and the 520c is the combo that the gps connects to with the "network" wire.

If i get another power cord and a shoot-thru-hull 200hz transducer, should i run the 520c with gps and sonar with the shoot-thru-hull and the x510c with the skimmer transducer off the back? Is there any reason to network to two?

FYI, the original owner really doesnt know jack about this/his stuff and I'm just trying to upgrade, if its worth the effort. Have not run a sonar test yet to see if the Pursuit hull is ok with shoot-thru.

Guess what i'm asking is - what would you do with this free stuff? do you know of a maker of cheaper power cords?

Thanks in advance,

GTR

nice.

Thanks.

Yes want to shoot thru hull.

Had not thought of silicone- the instructions say epoxy, but I don't know what kind...most epoxy yellows and cracks when in the elements, but thats sunlight or uv breaking it down I think, and this will be out of the direct light.

GTR

I have a friend that has replaced his sounder and gps with new, and he thoughtfuly donated his castoff units to me. These units are only 2 years old so its better than what we have now.

My question is - what kind or brand of epoxy or glue is to be used for securing the tranducer to the inside of the hull (fiberglass). The instructions show it "potted" about half way up the height of the transducer, about 3/4 of an inch. Was thinking of building a dam around it w/ modeling clay to keep the glue from spreading all over.

Any ideas whos glue to do this with?

thanks,

GTR

Good post, thanks.

Reminded me i wanted to find out what "pon,pon,pon" meant from Deadliest Catch. Read that there are different levels of distress.

GTR

glad its done, I diddnt like driving through the hood last year after dark

WHAAAT...you mussa been on Empire Ave.

Had to weave thru 300+ drinkin in the street 1 night gettin out late 11pm from dnr launch...WOW! F350 and a 24 ft boat didnt faze a single 1. I commented to my brother that "I like to see Gov. Granholm ride her bike through town now". Oh well still gonna fish:D maybe South Haven more this year if the thefts and horribl road conditions continue in BH. Busted an axle on trailer there last year:mad:

GTR

I just fed the angus herd...its in cass county.

no PETA fans here.

GTR

WOW that looks chilly.

GTR

thats kind of how it went on our wedding day,got married on the beach in manistee then went out with the wife and caught our limit of kings:grin:thats where we go for our anaversery too:grin:i love my wife!

You are livin the dream. Wedding fish,anniversary fish...lucky guy:)

GTR

Welcome Jason.

like you I found this site and its been great ever since:D

GTR

ps i'm just down 12 from you...got a farm by shavehead lk.

that snowblower and skidloader forks in your pic just remind me of the work that needs done....oh well it will wait- it gettin time to fish!!!

Welcome Maketheturn.

You guys see this guys web site? They do weddins. Can you imagine saying "I DO....wait baby FISH ON!!!":D

GTR

If you trailer.

Make sure you get US Boat or coverage for towing the boat on land if your tow vehicle breaks down...most auto insurance covers towing for your truck but not your boat. Last thing you want is your boat and gear left on side of road...or a VERY expensive tow bill not coverd by insurance.

GTR

Lifes to short not to spend it with a good dog:)

For you guys shopping for pups/dogs check out my friends place.

http://www.kountrysidekennel.com/

We got a new pup a lil over a year ago.

She is a smart yellow lab that is great with the kids.

GTR

I'm no marine mechanic,shadetree at best, but have had our engine and outdrive(350/alpha1)out twice. The outdrive needs to be alighned with the engine. I made a tool but found putting the engine in and having the outdrive ready to install,then hiring the alighnment was easyest. Good time to check/replace those u-joints and bearings. We have an upper bearing that growels at low rpm's makes me crazy.

So i think if you pull the engine you dont save anything by leaving the outdrive on...

Someone who knows more can say if i'm full-o-it:D

GTR

Looks like trolling in IL waters alows 3rod/person. See IL fish regs pg 6.

http://dnr.state.il.us/fish/digest/2010%20Fishing%20Guide.pdf

While checking that I see IL allows snagging...learn sumptin new every day.

Thats a no-no here in MI.

GTR

Cool, it is alot of fun.

GTR

I think you just need a NMEA 0183 cable...not 100% sure of your lowrance and raymarine products, but this is the standard format. I have garmin gps hooked to simrad ap. You may need to get manuals to get the settings set correctly.

GTR

Welcome, your in the right place.

GTR

usmcpaul, I have found this place to be very helpful and knowledgeable.

Its called brettsplaceonthebay its online store but they really were great when it came time to put down the cabbage. Prices + helpfull attitude = my bizniss:). Of course I shop all kinds of places but hey,whats 1 more...to use up your income on, stimulate the economy.

Also its located in MI, so I like that.

GTR

Well its supposed to be 48deg today.The Christmas lights are outta the hardpack now and can be stored away.

Seeing the temp rise and the lawn again has me itching to go to the big lake:D

C'MON spring!

GTR

There is one in sticky in salmon pro forum

GTR Located here

Someday maybe I can get set up.

It is ashame to build nice stuff then stick it together w/ MIG,which

works but isnt always pretty. My last project was rod trees and it was not going well w/ MIG...looked like a 5yr-old went nuts w/ a hot-glue gun:)

On the bracket the bottom hole tapped? then screw threaded thru into radial hole pattern?

GTR

Wow those look great.

I am a toolmaker and can appreciate your work.

Wish I could TIG weld though ,for my own projects.

GTR