GoldenBeaver

Where you located at?

Sent from my SM-G920R4 using Great Lakes Fisherman Mobile App

Fully equipped I'd consider that price

Sent from my SM-G920R4 using Great Lakes Fisherman Mobile App

Any equipment come with the boat...riggers, rods holders?

Sent from my SM-G920R4 using Great Lakes Fisherman Mobile App

These are some of the customs I just did all 3 are solid producers

Sent from my SM-G920R4 using Great Lakes Fisherman Mobile App

Sent from my SM-G920R4 using Great Lakes Fisherman Mobile App

I run a lot of uv. Over the past couple seasons it has by far out produced glow baits in low light conditions

Sent from my SM-G920R4 using Great Lakes Fisherman Mobile App

My experience with this is this. Spray paint straight out of the can comes out to thick and will chip very easy. The best results I've had has been with sandblasting the spoon or roughing it up with sandpaper (400 grit) then using an air brush to put a base coat of gloss white and then air brushing whatever other colors you want. Once dried apply 2 coats of diamond clear coat running that through my air brush as well.

Sent from my SM-G920R4 using Great Lakes Fisherman Mobile App

Orange/ Gold I'd run anytime you are fishing steelhead up high..the others it's kind of a toss up the white/black dots I like in overcast conditions

Sent from my SM-G920R4 using Great Lakes Fisherman Mobile App

Still available?

Sent from my SM-G920R4 using Great Lakes Fisherman Mobile App

SOLD

Sent from my SCH-R970 using Great Lakes Fisherman Mobile App

1 tekota 800 spooled with 300' of 45lb blood run copper. 8' medium heavy Talora copper rod. $200

1 tekota 800 spooled with 250' of 45lb blood run copper. 8' medium heavy Talora copper rod . $200

Sent from my SCH-R970 using Great Lakes Fisherman Mobile App

I've ran them with the 3 way swivel but recently switch to a planer board clip. How I set them up 6-8' mono leader clear snubbed and tie my braid to snubber let out 50' of line clip on your weight I typically run between 4 and 12oz weights let out however much line you want and attach my board.

Sent from my SCH-R970 using Great Lakes Fisherman Mobile App

If you're up to change switch your divers to slide divers. Tie a 20' piece of braid to the end of your wire using the improved Albright knot. Run your bait out to the start of the wire lock on your slide diver and your ready when it comes to storage all the wire will be on the reel. The are videos on you tube that go through the whole process.

Sent from my SCH-R970 using Great Lakes Fisherman Mobile App

I run strictly slide divers to get my long leads and have had great success with it. My wire divers are about 25' lead braid and mono divers anywhere from 25 to 50' depending on how the fish are in water column. The lake is so clear now that the more "stealth" presentation our offer the better.

Sent from my SCH-R970 using Great Lakes Fisherman Mobile App

Nice boat I wish it was a hard top

Rods are sold

Need some help finding a name for the flasher on the left. Any ideas?

I would add a 250 and a 500

Manitowoc, wi

These worked great for me on a smaller boat. I used them for lead core and flat lines

5 6'6" medium heavy ugly sticks and one 7' medium heavy do not know brand off hand. All are used buy in pretty good shape. Asking $90 for all or best offer. Would like to keep together but will consider seperating.

Pro king dragon slayer is a must have. Otherwise check out anglers Avenue. Russell carries all the major brands and has a lot of custom stuff that only he carries. You can also order from his website anglersavenueproshop.com

Wondering if anyone on here air brushes flashers or spoons. I want to try it but not sure what type of paints I should be using to stick to plastic and not peel or chip.

I have copper reels for sale. Tekota 700 and 800. Pm me

Do you still have 800s for sale? Interested how much are you asking?

Russell do you still have the fish flashers for sale?