1gwolf
-
Posts
5 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Store
Gallery
Posts posted by 1gwolf
-
-
Long List...
Replaced aft wood railings with new hand made mahogany railings
Replaced Teak steps with new hand made mahogany steps
Replace bow pulpit with a new hand made mahogany one
Replaced transom door with hand made new one
Installed two nicro solar fans for cabin air circulation
Sent all four down riggers to Big Jon for tune ups and auto stop installation.
Remounted two downriggers further aft and had all old holes patched and gel coated
Installed cable caps for the 4 downriggers and the camera
Built and installed new sup breaker panel for downriggers and aux lighting
Ran new main circuit to buss bars to organize wiring mess
Had auto pilot remote cable replaced
Had two old cable pass through holes patched and gel coated
Had the chips and stress cracks in the exhaust ports repaired
Had two gel coat voids repaired
I filled all old unused mounting holes in cockpit floor (West System Epoxy GREAT STUFF!!!)
New bottom paint
Had unused through hull tranducer removed, patched and gel coated
Washed and waxed her
Did complete tune up and oil changes on both engines ( need to set timing)
Rebuilt both raw water pumps
Having custom sheets made for the berth
WORK to be done...
Fix wiring mess
Need to refinish the trim I did not replace
Need to replace choke assy's
Need to replace holding tank sensor
I am sure I am forgetting somethings...lol
Tight lines...
-
I found the site through the ebay auction someone has posted.
-
Thanks Mike!!
--Ron
-
Hello all!!
Just wanted to say HEY!!
Look forward to this years reports as they happen!
I will be sharing my reports with you as I can.
I have a small boat at Noth Point Marina. This will be my first full year fishing Lake Michigan. I plan on fishing every weekend I can.
I have spent the last 7 years fishing it once in a while, so while not a complete newbie, I am pretty darn close...lol
I am looking forward to all the info I can get. I hope I can give back as much info as well...
Thanks for reading...
--1GWolf
Planer board questions
in Salmon Pro's Connection
Posted
Here is a newbie question.
What size and make inline planer board do you run?
Why that particular one?
What type of release are you using on your inline planer boards?
Why that particular release?
What lead lengths and weights are you running off of the planers?
I am trying to improve my planer handling.
Thanks in advance for all of your help!!
--Ron